Plastimo Professional Bosun's ChairPVC coated on both sides, 500 g/m2.
Reinforced seams, heavy duty webbing and canvas, and larger seat. The back strap and crotch piece will not only prevent you from falling out of the cair, but are so designed that the angle of the chair can be adjusted, allowing each individual to find the most comfortable working balance between back and legs. The wrap-around design provides added comfort and safety, ideal for an extended time aloft. The chair folds flat in a pouch which converts into a large tool pocket when the chair is in use. An elasticated band also helps storing smaller tools.
Extra-wide 50 mm webbing.
Rigid board seat, 42 x 22 cm.
Safe working load : 150 kg*.
* Safe working load indicated applies to the weakest element in the chair, i.e. the rigid board. The board excepted, all the materials used in our chairs can withstand loads from 1000 to 2000 kg. The figures indicated here are therefore deliberately conservative, in order to ensure your absolute safety even in the unlikely event that the board would break.
"Simple, strong and very sturdy with no difficult pressure points (…) and remarkable load bearing.
This is a heavy-duty vinyl bucket chair, (… ) with a seat sewn in and supported by three easily inspected webbing slings, and another webbing strap (…) with a single stainless D ring.
The crotch strap also runs through the D ring and there’s a high, secure backrest with an adjustment strap on the side. It comes in a vinyl stowage bag that cleverly clips on with a plastic clip to double as a kit bag when going aloft."
Yachting Monthly - April 2013