Harken 29mm T2 Single BlockUse for lightweight traveler controls, in mainsheet
and vang systems, cascades, bridles, and more.
Sheave Ř - 1 1/8" (29mm)
Length - 1 11/16" (43mm)
Max Line Ř - 5/16" (8mm)
Max Working Load - 330lbs (150kg)
Breaking Load - 1000lbs (454kg)
The loop slides easily through the block
head and over the anchor post for a secure
connection. No knots, splices, or tools required.
An SK 75 DyneemaŽ loop is included with
each block. Replacement loops available
Tie, splice, or lash to almost anything.
A length of covered SpectraŽ line is included.
Fiber-reinforced high-strength nylon-resin
sideplates have no metal fasteners for the
lightest block in Harken history. Both models
route the attachment line through the block
head and sheave, reducing load on the sideplates
and acting as a safety backup for your system.
Composite sheave spins on ball bearings
with fitted races for low-friction rolling.
Soft attachments reduce weight and noise
while allowing the block to articulate to
align with the load.
The simple construction requires no lubrication.
Blocks flush clean with fresh water.